5XZC-15 Mai Tsabtace iri & Grader
Gabatarwa
Ana amfani da mai tsaftace Seed & grader don tsaftacewa da tsara kowane nau'in iri, hatsi, wake, da sauran samfuran granule.
Zai iya dacewa da ayyuka da dalilai na musamman iri-iri.
Hakanan ana kiran injin tsabtace hatsin da ake kira vibrating inji za a iya amfani da shi sosai a farkon sarrafa shinkafa, gari, mai, da sauran abinci Ana amfani da shi don cire manyan ƙazanta, matsakaita da ƙanana, ta hanyar keɓance daban-daban tare da raga daban-daban. girman.Mai tsaftar girgiza zai iya rarraba shinkafa gwargwadon girmansa sannan zamu iya samun samfurin da girmansa daban-daban.
Tsabtace hatsin tsaba suna da halayen haɓakar ƙazanta mai girma, ingantaccen aiki, aiki mai santsi, ƙarancin wutar lantarki, ƙaramar amo, matsananciyar ƙarfi, haɗuwa mai sauƙi da gyarawa.
Zane-zane na aiki
Ƙa'idar aiki
Ciyar da hatsi a cikin hopper bayan iska, sa'an nan kuma a ƙarƙashin girgizar hatsin yana tsalle kuma yana gudana zuwa gangar jikin mai yawan Layer, yana biye da hatsin da ya dace ya shiga saman Layer na sama ta labulen roba.Hatsin da aka zaɓa za su fada cikin ƙaramin ƙaramin panel na gaba bayan sieving, ƙanƙara da tarkace da aka toshe ta sieves kuma a canja wurin zuwa wurin babban ƙazanta.Hatsin da aka zaɓa za su fada cikin ƙananan yadudduka sieving bangarori, kuma za a sanya su cikin matakan daban-daban na nau'in nau'in hatsi daban-daban ta hanyar yin amfani da shi a cikin yadudduka daban-daban, wanda ya haifar da bangarori na sieving suna da girman mash daban-daban.Hatsi da aka zaɓa suna gudana zuwa kantunan hatsi mai kyau, cika cikin jakar da aka rataye akan mariƙin jakar.Za'a iya amfani da hular kantuna lokacin da aka canza jakar da ke nufin hular na iya zama kusa lokacin da kuka canza jakar.Shi ne dukan aikin kwarara kwarara ga SEPARATOR.
Yi amfani da sieve daban-daban zuwa tsari daban-daban na nau'in hatsi daban-daban.Gilashin da ke kallo akan akwati na sikelin don duba aiki ne.
Nuni mai kusurwa da yawa
Chamber (Wind Sieve)
Cire ƙura, bambaro, hey, husk da sauran ƙazanta masu nauyi daga cikin hatsi.
Sarrafa da ƙwanƙwasa daidaita tazarar tashar (fadi a sama da kunkuntar a ƙasa) don samun kyakkyawan sakamako mai raba buri.Cire duk ƙazantar nauyi mai nauyi yayin da kyakkyawan iri ya faɗo ƙasa.
Tsarin kawar da kura
Mai raba ƙurar Cyclone ƙwararriyar hanya ce ta cire barbashi daga iska, iskar gas ko rafin ruwa, ba tare da amfani da masu tacewa ba.
Ana amfani da tasirin juyawa da nauyi don raba gaurayawan daskararru da ruwaye.
Hannun daidaita kwararar iska
Makullin iska yana fitar da ƙazanta daga mai raba guguwar ƙura da kiyaye matsa lamba na tsarin buri
Hatsi da aka ɗaga da bukitin guga kuma ya faɗi cikin akwatin watsa hatsi, inda ƙwayar hatsi ke watsawa daidai, idan hatsin ya taru a gefe ɗaya.Bayan haka hatsi ya fada cikin ganga mai daskarewa kuma an cire datti mai haske ta hanyar buri lokaci guda.
Hannu don daidaita kwararar hatsi yana watsewa daidai
Abincin hatsi da aka watse a cikin gangar jikin don rabuwa.A wannan ɓangaren, an ƙididdige hatsi / iri ta takardar galvanize tare da ramuka daban-daban a kowane Layer.Babban girma da ƙaramin ƙazanta da aka zubar a cikin kantuna daban-daban bi da bi.Tsaftataccen iri na ƙarshe yana fitowa daga babban kanti.
Kyakkyawan kantunan iri
Yana da matukar dacewa don fitar da sieves.Abokin ciniki na iya canza sieve cikin sauƙi lokacin tsaftace sauran hatsi ko iri.
A sieves a ciki an yi su da m galvanized karfe takardar.Za mu ba da dace sieves rami bisa ga abokin ciniki ta albarkatun kasa.
Don zaɓar cikakken sieves, samfurin iri (danyen abu ya ƙunshi ƙazanta) ko hoton ma'aunin iri ana buƙatar bayan abokan ciniki sun ba da oda.Lura cewa saitin saiti guda ɗaya an sanye su azaman daidaitaccen wadata, ana amfani dashi kawai don iri ɗaya.
Lura: Akwai sieve bakin karfe.
Bucket lif
Ana amfani dashi don canja wurin kayan (hatsi).Akwai a cikin ƙayyadaddun sigar guda biyu da mai motsi don daidaita yanayin aiki daban-daban.
Siffar
Yana da ƙaƙƙarfan tsari, ƙirar abokantaka mai amfani, mai sauƙin kulawa, ceton makamashi, mai sauƙin tsaftacewa, da kyau kauce wa cakuda.
Majalisar kula da wutar lantarki
Yana da fasalin aiki mai sauƙi, kawai buƙata
haɗa wutar lantarki.Wayar tana da 100% jan karfe,
wanda ke haifar da dogon amfani da rayuwa.
| Girma (L×W×H) | 5600×2100×3200mm |
| Girman kowane Layer na sieve | 2400×1500 mm |
| Ƙarfin (ƙidaya ta alkama) | 10000 kg/h |
| Nauyi | 1800 kg |
| Ƙarfin Motoci Jirgin iska Vibration Motors Motar Elevator Kulle iska | 7,5kw 0.75kw*2 0,75 kw 0,75 kw |
| Jimlar Ƙarfin | 10.5kw |
